HP Printer Black Or Color Ink Not Printing

HP Printer Black or color Ink Not Printing & other Print Quality Issues

Everyone gets stuck with printing device problems like HP printer not printing black before they learn how to fix them. It is obviously a matter of being reckless when you are preparing a school or an office report and the problem of HP printer not printing black arises. If you have a personal printer, it should be error free and you must ensure that the color calibration is done to avoid the problem of HP printer not printing color. Printer requires considerable care and you cannot leave it unused to let its ink dry. So, if you are purchasing one or have one, learn about troubleshooting the problem of HP printer not printing color. 

There can be varied reasons to HP printer not printing ink. Some of the common ones that are related to the hardware are: 

Short of ink in the cartridge

Short of ink in the cartridge

If you are facing the problem of HP printer not printing color, there might be a shortage of ink in the cartridge. For this, either get the ink refilled or the cartridge replaced. To check the ink levels, touch the (droplet)/ ink icon to display the current estimated ink levels. If the ink is sufficient and has not fallen too much, there might be another problem in your printer and that’s why the problem of HP printer not printing black & color ink is being faced. 

Improper installation of the ink cartridge

Improper installation of the ink cartridge

Sometimes the cartridge is not properly installed into the system and that’s why printing faces a lot of issues. The procedure of installing a new cartridge is a simple one:

  • Turn on the printer with a power button.
  • Open the cartridge door and wait for the carriage to come to the centre of the printer so that you can fetch the cartridge.
  • Slightly press down the cartridge pull it toward you till it comes out of its slot.
  • Use the colored pull tab to remove the protective tape from the new ink cartridge.
  • Just from where you removed the cartridge, slide in the new on in the same slot until it is firm in the slot after a ‘SNAP’ sound.
  • Close the cartridge door & you are ready to test the printer if it works fine now.

Printhead is not clear

hp printer Printhead is not clear

Printhead is the part of printer which makes the ink appear on paper as how it appears. So, it should be clear of any dust & dirt. If you are facing the problem of HP printer not printing black or colored ink, there is a possibility that due to mishandling, the printer printhead has been screwed up badly.

Most HP printers have removable printhead(s) so, if you are facing the problem of HP printer not printing ink and have tried everything else like replacing a cartridge, your Printer’s printhead is demanding replacement or just a bit of cleaning.  You can easily clean printhead by following some simple steps:

  • Reach to printer’s cartridge access area by lifting the door up and wait until the carriage stops moving.
  • Look for a latch on the carriage to remove single or multiple printhead from the carriage. 
  • Hold the printhead and remove it from the carriage.
  • Dampen a cotton cloth and clean the printhead by wiping the electrical contacts from the bottom to the top until cloth starts appearing to be clean. 
  • Use a dry cotton cloth to again clean the area that has been earlier wiped with a damp cloth till all the ink & debris leaves the printhead surface.
  • Slide the printhead back into the carriage and then lower the latch to fix it back in position. Shut the printer door which to bring back carriage in place.

The issue of HP printer not printing ink, if not solved by hardware checks and corrections, multiple checks on software ground are to be made to rectify the creeping issue of HP printer not printing black & color. The software checks of HP printer not printing ink are:

Check the driver installed

Check whether the printers & drivers installed are compatible with the system you are using. If not, check on and install latest device drivers. If yes, look for troubleshooting the problem of HP printer not printing color with some other tested ways. 

Check Print Settings

If there is an issue of HP printer not printing the color, check the printer settings. It might be selected as Greyscale and not switched on to color.  To do the same, follow these steps:

  • In the Control Panel, click on “Devices & Printers”.
  • Right click on the printer that is connected and select “Printing Preferences”.
  • From the “Printing preferences”, click on Paper/Quality Tab and select color or deselect Greyscale.
  • Now get ready to receive a colored printout and get the problem of HP printer not printing color solved in a jiffy.

Check printer’s color calibration

Check printer’s color calibration

If the printer is not color calibrated, it might give rise to the problem of HP printer not printing color properly. In such a scenario, the printed material will be blurred, shadowed or in poor colors. If such is the case, colors are to be calibrated so that blue appears to be blue and red like as red. Printer calibration is necessary for correct alignment of the product. To check the color alignment, print the diagnostics page from the print reports menu on the control panel. If the color on the output page are not aligned with each other, there is a need for calibration. Follow these steps:

  • On Control Panel, click on Setup Option
  • Navigate through the following menus >> System Setup>>Print quality>> Calibrate color
  • Click on Calibrate Now & press Ok

This shall solve the issue of HP printer not printing color properly and you will be ready with your on the go printing requirements in just few clicks. So, next time you face an issue of HP printer not printing ink, visit us for remarkable and workable solutions. 

We make your devices work well than ever before so, STAY TUNED!