The majority of individuals believe they understand how to reset a tp-link extender, however many winds up doing the incorrect reset and causing additional problems. So, let’s look at how to troubleshoot a TP-Link extender that isn’t communicating with your router or connecting to the internet.
Troubleshooting the wireless extender network, which includes performing a restore/reset on the extender, is an essential component of the troubleshooting process. There are now two methods for resetting the tp-link extender:
- Reset the console (Dashboard Reset)
- To restore default settings, use the Reset key on your keyboard (Hard Reset)
It is recommended that you check the main router before you reset the Tplink Extender since doing a factory reset will solve many problems related to settings, performance, connection, and security. Before you proceed with the procedures on the Tplink Extender, you must first ensure that the primary router’s internet is operational.
Reset the Tp-Link Extender
Now, before you do a hard reset on the uplink extender, please restart the range extender and then carefully inspect the back of the extender for the reset key, which may be located at the bottom of the extender in some instances.
Find a pen, paperclip, toothpick, or any other small non-metallic object and carefully push the Reset key for 10-15 seconds, ensuring that the Range extender’s power is turned on and releasing the Reset key when you see all of the lights on the Tplink extender blinking together.
Give it a minute or two, then factory reset Tp-link extender and restore to their original state. All of your Range Extender’s default settings may be found at the bottom of the device’s label. It is now necessary to configure the Tp-link Range Extender as a new extender in conjunction with your existing network.
DashboardReset TP-Link Extender
If you don’t want your extender to suffer a hardware failure while you’re doing a Hard Reset, this is the safest method of restoring the extender’s configurations. Please follow the steps below to reset your Tplink extension.
- The ability to do something. Restart the extender as well as any other devices that you want to use to complete the task. Anyone may make use of any device.
- Using the Full Browser, please. Devices such as desktop computers, laptop computers, smartphones, tablets, and iOS devices. As long as they are connected to a tp-link Repeater, they may use the whole browser.
- Open your Internet Browser and type 192.168.0.254 or tplinkrepeater.net into your browser’s Address bar, followed by the Enter key.
- If you use the default credentials to log into Tplink Extender, you may be prompted for them. In your extender’s bottom label, you should be able to find the default login and password. Login using your credentials by entering them here.
- After logging in, choose System Tools from the drop-down menu. Select Backup & Restore from the drop-down menu.
- To complete the factory reset, press the Factory Reset button and wait for the process to be completed. Follow the on-screen instructions and reboot the extender once it has been reset. Then reconfigure the extender as needed.
What is the purpose of resetting your TP-Link Range Extender?
There aren’t any particular reasons why you should reset your range extenders to their factory default settings, other than the fact that you can. One of the most frequent reasons you might want to reset your TP-Link Range extender is that you are experiencing particular problems with your device.
Your TP-Link Range extender may be experiencing problems, and you may be trying to fix the problem in various ways. Some issues, on the other hand, are impossible to resolve since it is impossible to determine what is causing the pain. In such cases, the only option available would be to restore the system to its factory settings. The process will restore your gadget to the condition it was in when it was first purchased. The majority of the problems you may be experiencing will be resolved as a result of this.